Aluminium and Cast Iron Helical Transmission Gearbox for Speed Reduction

 

Product Description

Major Attributes:
one) Produced of substantial high quality material,  non-rustingBoth flange and foot mounting CZPT and suited for all-spherical set up
two) Massive output torque and higher radiating efficiency
3)Exact grinding helical gear with Smooth managing and minimal noise, no deformation,can work long time in dreadful issue
4)Wonderful appearance, sturdy service daily life and small quantity, compact composition
five)Equally two and three stage CZPT with vast ratio assortment from 5 to 200
six)CZPT output shaft diameter CZPT 18-22-28-32-40-50mm
seven)Modular building enlarge ratio from five to 1400

Major Components:
1)housing with aluminium alloyand forged iron materials
2)Output Shaft Content:20CrMnTi
three)Very good quality no sounds bearings to hold prolonged services existence
4)Substantial functionality oil seal to prevent from oil leakage

Purposes:
G3 Sequence helical gear motor are vast utilized for all sorts of computerized gear, this kind of as chip removal device, conveyor, packaging tools, woodworking equipment, farming tools, slurry scraper ,dryer, mixer and so on.

Comprehensive Photographs

Product Parameters

 

(n1=1400r/min  50hz)
norminal ratio			five	ten	15	20	25	30	40	fifty	sixty	eighty	100	one hundred	a hundred and twenty	a hundred and sixty	200
.1kw	output shaft		Ø18								Ø22
	n2* (r/min)		282	138	ninety two	70	56	forty six	35	28	23	18	fourteen	–	eleven	9	seven
	M2(Nm)	50hz	3.2	six.5	nine.8	twelve.9	sixteen.1	19.6	25.seven	31.1	37.5	forty nine.5	62.9	–	seventy six.1	one hundred.seven	a hundred twenty five.4
		60hz	three	five	8	eleven	13	seventeen	21	26	31	41	52	–	63	eighty four	105
	Fr1(N)		588	882	980	1180	1270	1370	1470	1570	2160	2450	2450	2450	2450	2450	2450
	Fr2(N)		176
norminal ratio			5	ten	15	20	25	30	forty	fifty	60	eighty	a hundred	100	a hundred and twenty	a hundred and sixty	two hundred
.2kw	output shaft		Ø18					Ø22						Ø28
	n2* (r/min)		282	138	ninety two	70	fifty six	forty five	35	29	23	18	14	thirteen	12	eight	seven
	M2(Nm)	50hz	6.five	12.six	19.one	26.three	32.6	38.9	fifty.four	sixty three	75.6	100.eight	103.nine	a hundred twenty five.4	a hundred and fifty	200.four	250.seven
		60hz	five.4	10.5	sixteen.six	21.nine	27.1	32.4	forty two	52.5	sixty three	84	86.six	104.5	a hundred twenty five	167	208.nine
	Fr1(N)		588	882	980	1180	1270	1760	1860	1960	2160	2450	2450	2840	3330	3430	3430
	Fr2(N)		196
norminal ratio			5	ten	15	20	twenty five	thirty	40	fifty	sixty	eighty	100	a hundred	one hundred twenty	a hundred and sixty	two hundred
.4kw	output shaft		Ø22					Ø28						Ø32
	n2* (r/min)		288	one hundred forty four	ninety two	72	58	forty seven	36	29	24	18	14	fourteen	12	9	7
	M2(Nm)	50hz	12.nine	twenty five	38.6	fifty one.4	65.four	78.two	a hundred.seven	a hundred twenty five.four	one hundred fifty	two hundred.4	206.eight	250.seven	301.one	400.seven	461.eight
		60hz	10.seven	20.8	32.one	42.9	54.five	sixty five.2	eighty three.nine	104.five	125	167	172.three	208.nine	250.nine	333.9	384.eight
	Fr1(N)		882	1180	1370	1470	1670	2550	2840	3140	3430	3430	3430	4900	5880	5880	5880
	Fr2(N)		245
norminal ratio			five	10	fifteen	20	25	30	40	50	60	eighty	a hundred	one hundred	a hundred and twenty	a hundred and sixty	200
.75kw	output shaft		Ø28					Ø32						Ø40
	n2* (r/min)		278	a hundred and forty	94	sixty nine	58	forty six	35	29	24	18	14	14	11	nine	seven
	M2(Nm)	50hz	24.six	forty eight.2	seventy two.9	97.5	122.1	a hundred forty five.seven	187.five	235.seven	282.nine	376.1	387.9	439	527	703	764
		60hz	20.5	forty.2	sixty.7	81.three	201.8	121.4	156.three	196.four	235.seven	313.four	323.2	366	439	585	732
	Fr1(N)		1270	1760	2160	2350	2450	4571	4210	4610	5490	5880	5880	7060	7060	7060	7060
	Fr2(N)		294
norminal ratio			five	10	15	twenty	25	thirty	forty	50	sixty	80	one hundred	a hundred	120	one hundred sixty	two hundred
one.5kw	output shaft		Ø32					Ø40						Ø50
	n2* (r/min)		280	a hundred and forty	93	70	fifty five	forty seven	34	27	24	seventeen	fourteen	13	twelve	8	seven
	M2(Nm)	50hz	forty eight.two	ninety seven.five	a hundred forty five.seven	193.9	242.one	272	351	439	527	703	724	878	1060	1230	1230
		60hz	forty.two	81.three	121.4	161.six	201.eight	226	293	366	439	585	603	732	878	1170	1230
	Fr1(N)		1760	2450	2840	3230	3820	5100	5880	7060	7060	7060	7060	9800	9800	9800	9800
	Fr2(N)		343
norminal ratio			5	10	15	twenty	25	thirty	forty	fifty	sixty	eighty	a hundred
two.2kw	output shaft		Ø40					Ø50
	n2* (r/min)		272	136	95	sixty eight	54	forty five	36	28	24	eighteen	14
	M2(Nm)	50hz	67	133	two hundred	266	332	399	515	644	773	1571	1230
		60hz	56	111	167	221	277	332	429	537	644	858	1080
	Fr1(N)		2160	3140	3530	4571	4700	6960	7250	8620	9800	9800	9800
	Fr2(N)		392

Outline and mounting dimension:

G3FM: A few Phase Gear MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Electricity kw	output shaft	ratio	A		F	I	J	M	O	O1	P	Q	R	S	T	U	W	X	Y	Y1
			common	brake
.1kw	Ø18	five-10-15-twenty-25-thirty-forty-fifty	236	270	192.5	11	16.five	one hundred seventy	four	10	thirty	145	35	18	20.5	129	six	157	eighty	eighty one
	Ø22	60-80-100-120-160-200	262	296	197.five	11	19	185	4	12	40	148	47	22	24.5	129	6	171.5	89.5	eighty three.5
.2kw	Ø18	5-ten-15-20-25	267	270	192.5	eleven	sixteen.5	a hundred and seventy	four	10	thirty	one hundred forty five	35	18	twenty.five	129	six	161	80	81
	Ø22	30-40-50-sixty-80-a hundred	293	296	197.five	eleven	19	185	4	twelve	forty	148	forty seven	22	24.5	129	six	171.five	89.5	eighty three.five
	Ø28	one hundred-120-one hundred sixty-two hundred	306	309.5	208.five	11	23.5	215	four	15	forty five	170	fifty	28	31	129	8	198.five	105.five	88
.4kw	Ø22	5-ten-15-20-25	314	324.5	204	11	19	185	4	12	forty	148	forty seven	22	24.5	139	6	171.5	89.5	88.5
	Ø28	thirty-40-fifty-sixty-eighty-100	330	337.5	215	eleven	23.five	215	four	fifteen	45	a hundred and seventy	fifty	28	31	139	eight	198.five	a hundred and five.5	93
	Ø32	100-a hundred and twenty-one hundred sixty-two hundred	349	357	229.5	thirteen	28.five	250	4	fifteen	fifty five	one hundred eighty	sixty	32	35	139	10	234	126	98
.75kw	Ø28	five-10-15-twenty-25	350.five	343.5	227.5	eleven	23.five	215	four	15	forty five	a hundred and seventy	50	28	31	159	eight	198.five	a hundred and five.5	103
	Ø32	thirty-40-50-sixty-80-a hundred	379.5	387	242	13	28.five	250	4	15	55	180	60	32	35	159	ten	234	126	108
	Ø40	a hundred-one hundred twenty-a hundred and sixty-200	401.5	408.5	270	18	34	310	5	eighteen	65	230	seventy one	forty	43	185	twelve	284	149	126.five
one.5kw	Ø32	5-10-fifteen-20-twenty five	420.five	441	254	13	28.5	250	5	fifteen	55	one hundred eighty	sixty	32	35	185	10	234	126	121
	Ø40	30-40-fifty-60-80-a hundred	457.5	478	270	eighteen	34	310	five	eighteen	65	230	71	40	forty three	185	12	284	149	126.five
	Ø50	a hundred-one hundred twenty-a hundred and sixty-two hundred	485.5	506	300	22	40	360	5	twenty five	75	270	83	50	fifty three.5	185	14	325	173.5	132.five
two.2kw	Ø40	five-10-15-20-25	466.5	487	270	eighteen	34	310	five	18	sixty five	230	seventy one	40	43	185	12	284	149	126.5
	Ø50	30-40-fifty-60-80-a hundred	510.five	531	300	22	forty	360	five	25	75	270	83	fifty	fifty three.five	185	fourteen	325	173.five	132.five

 

G3LM: 3 Stage Gear MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Electricity kw	output shaft	ratio	A		D	E	F	J	G	H	K	P	S	T	U	V	W	X	Y	Y1
			standard	brake
.1kw	Ø18	five-ten-fifteen-twenty-twenty five-thirty-forty-fifty	236	270	forty	a hundred and ten	135	16.5	65	9	45	30	18	twenty.5	129	183	six	133	85	ten
	Ø22	60-80-a hundred-a hundred and twenty-160-two hundred	262	296	sixty five	one hundred thirty	155	19	ninety	11	fifty five	40	22	24.5	129	193	six	139.5	ninety	twelve
.2kw	Ø18	5-ten-15-twenty-25	267	270	forty	one hundred ten	135	16.5	65	nine	45	30	18	twenty.five	129	183	six	133	eighty five	10
	Ø22	30-forty-50-sixty-80-a hundred	293	296	65	one hundred thirty	155	19	ninety	11	fifty five	forty	22	24.five	129	193	six	139.five	90	twelve
	Ø28	one hundred-one hundred twenty-one hundred sixty-200	306	309.five	ninety	one hundred forty	one hundred seventy five	23.5	one hundred twenty five	11	sixty five	45	28	31	129	203	eight	a hundred and seventy	a hundred and ten	fifteen
.4kw	Ø22	five-10-15-20-twenty five	314	324.five	sixty five	130	a hundred and fifty five	19	90	11	fifty five	forty	22	24.5	139	199.5	6	141.five	90	twelve
	Ø28	thirty-forty-fifty-60-eighty-one hundred	330	337.5	90	one hundred forty	175	23.5	125	11	65	forty five	28	31	139	210	eight	one hundred seventy	one hundred ten	15
	Ø32	a hundred-a hundred and twenty-a hundred and sixty-two hundred	349	357	130	a hundred and seventy	208	28.five	170	thirteen	70	fifty five	32	35	139	226	ten	198	a hundred thirty	18
.75kw	Ø28	five-10-15-20-25	350.five	343.five	ninety	one hundred forty	a hundred seventy five	23.five	one hundred twenty five	11	sixty five	45	28	31	159	222	eight	a hundred and seventy	one hundred ten	15
	Ø32	30-forty-50-sixty-eighty-one hundred	379.five	387	a hundred thirty	one hundred seventy	208	28.five	170	thirteen	70	55	32	35	159	238.5	ten	198	one hundred thirty	18
	Ø40	100-120-a hundred and sixty-two hundred	401.five	408.five	one hundred fifty	210	254	34	196	15	ninety	sixty five	40	43	185	249	12	230	one hundred fifty	20
1.5kw	Ø32	five-10-15-20-25	420.five	441	a hundred thirty	one hundred seventy	208	28.five	one hundred seventy	thirteen	70	fifty five	32	35	185	250.5	10	198	130	eighteen
	Ø40	30-forty-50-sixty-eighty-a hundred	457.5	478	150	210	254	34	196	fifteen	90	65	forty	forty three	185	260	twelve	230	a hundred and fifty	20
	Ø50	one hundred-120-160-200	485.5	506	160	230	290	40	210	eighteen	a hundred	75	fifty	53.five	185	288	fourteen	265	170	25
2.2kw	Ø40	five-10-15-20-25	466.5	487	a hundred and fifty	210	254	34	196	fifteen	ninety	65	forty	forty three	185	260	12	230	one hundred fifty	twenty
	Ø50	thirty-40-fifty-sixty-eighty-one hundred	510.five	531	160	230	290	40	210	eighteen	one hundred	seventy five	50	fifty three.5	185	288	14	265	one hundred seventy	25

 

G3FS: IEC Gear REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Electrical power kw	output shaft	ratio	A	B	C	F	I	J	L	M	N	O	O1	P	Q	R	S	S1	T	T1	W	W1	X	Y	Y1
.12kw	Ø18	five-ten-fifteen-twenty-25-thirty-forty-fifty	147	ninety five	115	154	eleven	16.five	four.5	one hundred seventy	one hundred forty	4	ten	thirty	a hundred forty five	35	18	eleven	twenty.five	12.eight	6	4	163	80	86.five
	Ø22	60-eighty-a hundred-120-one hundred sixty-200	173	ninety five	a hundred and fifteen	164	eleven	19	four.five	185	a hundred and forty	four	twelve	40	148	forty seven	22	11	24.five	twelve.eight	six	four	171.five	89.5	89
.18kw	Ø18	5-ten-fifteen-twenty-25	147	ninety five	115	154	11	16.five	four.5	170	140	4	10	30	a hundred forty five	35	18	11	20.5	twelve.8	six	4	163	eighty	86.5
	Ø22	thirty-forty-50-sixty-80-a hundred	173	95	a hundred and fifteen	164	eleven	19	4.five	185	a hundred and forty	4	12	40	148	forty seven	22	11	24.5	12.eight	six	four	171.five	89.five	89
	Ø28	one hundred-one hundred twenty-a hundred and sixty-200	186.5	95	a hundred and fifteen	186	eleven	23.five	4.five	215	140	four	15	forty five	one hundred seventy	50	28	eleven	31	twelve.eight	8	four	198.5	a hundred and five.5	93.5
.37kw	Ø22	five-ten-fifteen-twenty-25	181.5	110	a hundred thirty	164	eleven	19	four.five	185	a hundred and sixty	four	twelve	forty	148	forty seven	22	14	24.five	16.3	6	5	201	89.five	99
	Ø28	30-forty-fifty-sixty-80-a hundred	198	a hundred and ten	a hundred thirty	186	11	23.five	4.5	215	one hundred sixty	four	15	45	one hundred seventy	fifty	28	fourteen	31	16.three	eight	five	198.5	105.5	103.five
	Ø32	100-a hundred and twenty-a hundred and sixty-two hundred	216.5	one hundred ten	one hundred thirty	215	thirteen	28.five	4.five	250	one hundred sixty	4	15	fifty five	one hundred eighty	sixty	32	14	35	16.3	ten	5	234	126	108.5
.75kw	Ø28	five-ten-15-twenty-25	206.five	one hundred thirty	a hundred sixty five	185	11	23.5	four.five	215	two hundred	4	15	forty five	170	50	28	19	31	21.eight	eight	six	216.five	one zero five.5	123.five
	Ø32	30-40-fifty-60-80-100	235	130	a hundred sixty five	215	13	28.five	4.five	250	two hundred	4	15	fifty five	a hundred and eighty	60	32	19	35	21.8	ten	6	236.five	126	128.5
	Ø40	a hundred-one hundred twenty-a hundred and sixty-200	260.five	a hundred thirty	one hundred sixty five	270	18	34	4.5	310	200	5	18	65	230	71	40	19	43	21.8	twelve	8	284	149	134
one.5kw	Ø32	5-10-fifteen-twenty-25	252	130	165	215	thirteen	28.five	4.5	250	200	five	15	55	a hundred and eighty	60	32	24	35	27.3	10	8	236.5	126	128.5
	Ø40	thirty-forty-50-sixty-80-a hundred	293.5	one hundred thirty	one hundred sixty five	270	eighteen	34	four.five	310	two hundred	5	18	sixty five	230	seventy one	40	24	43	27.three	twelve	eight	284	149	134
	Ø50	100-120-160-200	321.5	one hundred thirty	165	300	22	40	four.5	360	two hundred	5	twenty five	seventy five	270	eighty three	50	24	53.5	27.three	14	eight	323.five	173.5	140
2.2kw	Ø40	5-ten-15-twenty-twenty five	290	one hundred eighty	215	270	eighteen	34	5.five	310	250	5	eighteen	sixty five	230	seventy one	40	28	forty three	31.three	12	eight	284	149	134
	Ø50	thirty-forty-50-sixty-80-one hundred	334	a hundred and eighty	215	three hundred	22	forty	5.five	360	250	five	twenty five	seventy five	270	eighty three	50	28	53.five	31.3	fourteen	eight	323.five	173.5	140

 

G3LS: IEC Gear REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Electrical power kw	output shaft	ratio	A	B	C	D	E	F	G	H	J	K	L	N	P	S	S1	T	T1	W	W1	X	Y	Y1	Z
.12kw	Ø18	5-10-15-20-25-thirty-40-fifty	147	ninety five	a hundred and fifteen	40	one hundred ten	a hundred thirty five	sixty five	9	sixteen.five	45	4.5	140	30	18	11	20.5	twelve.8	6	4	138.five	eighty five	ten	M8
	Ø22	sixty-80-one hundred-one hundred twenty-160-200	173	95	a hundred and fifteen	65	a hundred thirty	154	ninety	11	19	fifty five	4.5	one hundred forty	40	22	11	24.five	twelve.eight	6	four	141	90	twelve	M8
.18kw	Ø18	five-10-fifteen-twenty-25	147	ninety five	one hundred fifteen	forty	a hundred and ten	a hundred thirty five	65	9	16.5	forty five	4.five	one hundred forty	thirty	eighteen	eleven	20.5	twelve.eight	six	four	138.5	85	ten	M8
	Ø22	30-40-50-60-eighty-one hundred	173	95	a hundred and fifteen	65	130	154	90	eleven	19	fifty five	four.five	140	forty	22	eleven	24.5	12.eight	six	four	141	ninety	twelve	M8
	Ø28	a hundred-one hundred twenty-one hundred sixty-two hundred	186.5	95	a hundred and fifteen	90	one hundred forty	a hundred seventy five	125	11	23.5	65	4.5	140	45	28	eleven	31	twelve.eight	eight	4	170	a hundred and ten	15	M8
.37kw	Ø22	5-10-fifteen-twenty-twenty five	181.five	110	a hundred thirty	65	one hundred thirty	154	90	eleven	19	55	4.5	a hundred and sixty	40	22	14	24.five	16.three	6	five	151	90	12	M8
	Ø28	30-40-50-sixty-80-a hundred	198	a hundred and ten	130	90	140	175	one hundred twenty five	11	23.five	65	four.5	a hundred and sixty	45	28	14	31	16.3	eight	5	one hundred seventy	110	15	M8
	Ø32	a hundred-one hundred twenty-a hundred and sixty-two hundred	216.five	one hundred ten	a hundred thirty	a hundred thirty	a hundred and seventy	208	a hundred and seventy	13	28.five	70	four.five	a hundred and sixty	fifty five	32	fourteen	35	16.3	10	five	198	130	18	M8
.75kw	Ø28	five-ten-fifteen-twenty-twenty five	206.five	130	165	ninety	a hundred and forty	a hundred seventy five	125	11	23.5	sixty five	4.five	200	45	28	19	31	21.8	8	6	186.five	a hundred and ten	15	M10
	Ø32	thirty-40-50-sixty-eighty-a hundred	235	one hundred thirty	165	a hundred thirty	170	208	170	thirteen	28.five	70	four.five	200	55	32	19	35	21.eight	10	6	201.five	130	18	M10
	Ø40	a hundred-120-160-two hundred	260.5	one hundred thirty	a hundred sixty five	one hundred fifty	210	254	196	fifteen	34	90	4.5	200	65	forty	19	forty three	21.eight	twelve	8	230	150	20	M10
1.5kw	Ø32	5-ten-15-twenty-twenty five	252	one hundred thirty	165	a hundred thirty	one hundred seventy	208	170	thirteen	28.five	70	four.five	200	55	32	24	35	27.three	ten	8	201.5	one hundred thirty	eighteen	M10
	Ø40	thirty-forty-fifty-60-80-100	293.five	130	a hundred sixty five	one hundred fifty	210	254	196	15	34	ninety	four.5	two hundred	sixty five	40	24	43	27.3	twelve	8	230	a hundred and fifty	twenty	M10
	Ø50	one hundred-120-one hundred sixty-200	321.5	one hundred thirty	a hundred sixty five	a hundred and sixty	230	290	210	eighteen	40	a hundred	4.5	two hundred	75	fifty	24	fifty three.5	27.3	14	8	265	one hundred seventy	twenty five	M10
2.2kw	Ø40	five-ten-15-20-25	290	one hundred eighty	215	one hundred fifty	210	254	196	15	34	90	5.five	250	sixty five	40	28	43	31.three	twelve	8	230	a hundred and fifty	20	M12
	Ø50	thirty-forty-50-60-eighty-one hundred	334	180	215	160	230	290	210	eighteen	40	a hundred	5.5	250	seventy five	50	28	53.five	31.3	14	eight	265	a hundred and seventy	25	M12

Company Profile

We are a professional reducer producer situated in HangCZPT, ZHangCZPTg province.Our major goods is  full range of RV571-150 worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Computer models, UDL Variators and AC Motors, G3 helical equipment motor.Items are extensively utilised for purposes this sort of as: foodstuffs, ceramics, packing, substances, pharmacy, plastics, paper-producing, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic strains, and assembly traces.With rapidly delivery, outstanding following-revenue services, CZPTd generating facility, our products market well  both at property and overseas. We have exported our reducers to Southeast Asia, CZPT CZPTpe and the Middle CZPT and so on.Our aim is to create and innovate on the foundation of higher high quality, and generate a good reputation for reducers.

Workshop:

 

Exhibition

ZheCZPT PTC Truthful:

Packaging & Shipping and delivery

Following Income Service

one.Servicing Time and Guarantee:In one particular calendar year right after receiving goods.
2.Other Services: Including modeling variety guide, installation guide, and problem resolution guide, etc

FAQ

one.Q:Can you make as per customer drawing?
A: Indeed, we supply CZPT services for clients appropriately. We can use customer’s nameplate for gearboxes.
two.Q:What is your terms of payment ?
A: 30% deposit ahead of manufacturing,stability T/T prior to delivery.
3.Q:Are you a trading company or company?
A:We are a manufacurer with CZPTd gear and seasoned workers.
four.Q:What is actually your production potential?
A:4000-5000 PCS/Month
five.Q:Totally free sample is CZPT or not?
A:Yes, we can source free of charge sample if client agree to spend for the courier cost
six.Q:Do you have any certification?
A:Indeed, we have CE certification and SGS certificate report.

Get in touch with information:
Ms Lingel Pan
For any questions just really feel free ton make contact with me. Several thanks for your type focus to our business!