UMC® is the industry chief in gearbox engineering. More than our 40 12 months history we have launched numerous industry shifting gearboxes such as the patented TNT gearbox, the 740, the 760, the 775 and more. We keep on to determine and redefine market specifications for gearbox efficiency, high quality, characteristics and technological innovation. Our gearboxes are purpose created to do the job. Never ever over-engineered.

UMC® stands guiding its items and is fully commited to production the very best goods for a world-wide market place.

740-U fifty:one Ratio

Created for for a longer time spans, more substantial wheels, and heavier towers.
 

Attributes and Positive aspects

• two.25 inch output shaft
• fifty:1 gear ratio
• Cartridge input and output seals
• Bigger enter bearings
• Input shaft guard
• Exterior seal protectors for enter and output seals
• Top oil fill plug
• CZPT mounting pattern
• Entire cycle growth chamber with stainless metal include
• Crammed with severe pressure worm equipment oil
• Metal output shaft and enter shaft
• Tapered roller bearings
• Consists of carriage bolts and nuts
• Dual ended enter shaft

740-UV fifty two:one Ratio
Designed for more time spans, larger wheels and heavier towers exactly where an prolonged output shaft is necessary.
 This gearbox has all the exact same capabilities, characteristics and benefits that the standard 740 has with a few tweaks. The output shaft is prolonged, the equipment ratio is fifty two:1 and the input shaft is manufactured of ductile iron with a 25° force angle allowing this gearbox to be utilised on center pivot and lateral shift/ linear methods that occur normal with these technical specs.

Characteristics and Positive aspects

• 2.twenty five inch prolonged output shaft
• fifty two:one gear ratio with 25° force angle
• Cartridge enter and output seals
• Larger input bearings
• Input shaft guard
• Exterior seal protectors for input and output seals
• Best oil fill plug
• CZPT mounting pattern
• Complete cycle enlargement chamber with stainless steel include
• Loaded with severe force worm gear oil
• Steel output shaft and ductile iron input shaft
• Tapered roller bearings
• Involves carriage bolts and nuts
• Twin finished enter shaft

 

760-UV CZPT

Designed for corner programs and lateral transfer carts exactly where an prolonged output shaft is essential

 

Growers normally use UMC’s 760-UV gearbox for the most extreme applications where an extended output shaft is necessary. The gearbox is made for larger yearly hours of operation whilst managing the large loads seasoned on corner methods and lateral transfer carts as well as the most severe area situations exactly where wheel rutting is distinguished, soil is large, and tower weights are higher.

 

The UMC® 760-UV ultimate generate gearbox is our premier and most tough gearbox with an prolonged output shaft. It characteristics a larger-diameter bull equipment than the regular 740 collection to take care of twenty% larger torque. It also features a 2.5″ output shaft to accommodate much more overhung load. It is developed for use on heart pivots, corners, lateral go/ linear irrigation techniques and carts the place a 52:1 gear ratio and prolonged output shaft are regular specifications.

Functions and Advantages

• two.5″ output shaft
• 52:one gear ratio with a 25° force angle
• Exclusive twin enter and output seal layout
• twenty% far more torque ability than the standard 740
• Bronze equipment optional
• More substantial enter bearings
• Input shaft guard
• External seal protectors for input and output seals
• eleven-Bolt mounting pattern
• Complete cycle enlargement chamber with aluminum go over
• Stuffed with extreme pressure worm gear oil
• Metal output shaft and ductile iron input shaft
• Tapered roller bearings
• Involves carriage bolts and nuts
• Twin finished input shaft

TNT-2 CZPT

Created for apps where the irrigation system may need to be towed

 

This gearbox is the ideal solution for a towable irrigation technique. Growers typically prefer this gearbox over a gearbox with a towable hub. Merely disengage the worm and tow your technique to its functioning location, then re-engage the worm and you are ready to run. The CX coupler is the ideal compliment for the TNT-2 gearbox because of to the capacity to management coupler disengagement at the gearbox.

 

The UMC® patented TNT-2 closing drive gearbox is made specifically for applications in which a heart pivot or lateral go/ linear irrigation method demands to be towed. The gearbox gives the ability to disengage the worm equipment and allows users to shift techniques from a single region to another CZPT requiring a Towable Hub insert on.

Attributes and Positive aspects

• 2.25″ output shaft
• fifty:1 equipment ratio
• Dual enter seals with triple lip output seals
• Bronze equipment optional
• Input shaft guard
• Exterior seal protectors for enter and output seals
• Prime oil fill plug
• 11-Bolt mounting sample
• Full cycle expansion chamber with stainless metal include
• Stuffed with intense strain worm gear oil
• Metal output shaft and enter shaft
• Tapered roller bearings
• Consists of carriage bolts and nuts
• Twin finished input shaft

 
 

760-UV Bronze CZPT

Created for the most intense situations exactly where an prolonged output shaft is required.

 

Growers normally use The UMC® 760-UV bronze gearbox for the most excessive apps where an prolonged output shaft is needed. The gearbox is developed for larger annual hrs of operation while handling the large loads experienced on corner systems and lateral shift carts as effectively as the most extreme subject problems where wheel rutting is prominent, soil is large, and tower weights are larger.

 

The UMC® 760-UV Bronze closing push gearbox is our biggest and most sturdy gearbox with an prolonged output shaft created for the most intense expanding conditions. It functions a higher energy aluminum bronze bull equipment and a warmth taken care of steel worm equipment giving it a significantly increased load potential than the standard 760-UV. Moreover, this equipment combination tremendously minimizes equipment put on, extending the beneficial existence of the gearbox. It also features a two.5″ output shaft to accommodate much more overhung load. It is developed for use on heart pivots, corners, lateral move/ linear irrigation methods and carts the place a fifty two:1 equipment ratio and prolonged output shaft are regular requirements.

Characteristics and Benefits

• two.5″ output shaft
• 52:1 equipment ratio with a 25° strain angle
• Special twin input and output seal style
• Bronze Equipment
• Heat Treated Metal Worm Gear
• Larger enter bearings
• Input shaft guard
• Exterior seal protectors for enter and output seals
• 11-Bolt mounting pattern
• Full cycle growth chamber with aluminum cover
• Stuffed with extreme strain worm gear oil
• Metal output shaft
• Tapered roller bearings
• Includes carriage bolts and nuts
• Dual ended enter shaft
• Also Available Assembled in the United states

UMC is the sector leader in gearbox technologies. Over 37 12 months historical past they have launched several business altering gearboxes this sort of as the patented TNT gearbox, the 740, the 760, the 775 and far more. UMC proceed to determine and redefine business expectations for gearbox efficiency, good quality, attributes and technological innovation. UMC gearboxes are function developed to do the work. In no way more than-engineered.UMC stands driving its products and is fully commited to manufacturing the very best items for a world-wide market.