Zd 5~8 Backlash High Precision and Helix Gear Round 90mm Ae Series Planetary Gearbox

Zd 5~8 Backlash High CZPT and Helix Gear Round 90mm Ae Series Planetary CZPT

ZD five~8 Backlash High CZPT and CZPTx Equipment Round 90mm AE Sequence Planetary CZPT

Product Description

AE Sequence Planetary CZPT moreover provides front and rear oil seals, employs the output shaft double assist framework and design and style of helix gear, which helps make the equipment meshing  smoother and secure, the AE Sequence can be employed in different handle transmission fields with servo motors. The backlash of the AE sequence is less than 5 arc.min and the reduction ratio addresses three~a hundred.

The Product Advantages of Planetary CZPT:

1.Adaptable framework layout, in line with various operating problems.
2.Ring gear processing technological innovation: Using inner gear slotting machine and hobbling equipment the precision of ring gear soon after processing can get to GB7.
three.Hardened gear secondary scraping technological innovation: secondary large-velocity dry slicing of gear removes equipment deformation triggered by warmth treatment method. Equipment accuracy can attain GB6.
four.CZPT backlash tests.

How To Read
90    AE    10    (  )     (S) – 40   T1
 a       b      c      d        e       f       g

a    Frame Dimensions     90=90mm
b    Series code: AE     Spherical mounting flange collection
c    Reduction Ratio     One Phase: 3,4,five,six,7,8,nine,10
    Two Levels: 15,twenty,25,thirty,35,forty,45,50,sixty,70,eighty,ninety,a hundred
d    Backlash     Single Phase: ≤5arc.min  
    Two Stages: ≤8arc.min 
e    Input shaft kind     S: Overall locking (Omitted) (Irrespective of no matter whether the motor has a keyway)
    S1: Locking with locking ring (No matter whether the motor has a  keyway )
    S2: Locking with keyway (Input shaft with key)
    K: With keyway
    A: Other varieties (Please get in touch with with us)
f Relevant servo motor energy (W),You should speak to us for specific electricity
g Please make contact with us for the mounting sort of the flange

 

Spesifications & Specifics

 

Item Sort Device Number Of Phase Reduction Ratio 90AE
Rated Output Torque N.M 1 three 85
4 ninety five
five a hundred and five
7 ninety three
eight eighty three
ten 70
2 12 115
15 a hundred and fifteen
sixteen a hundred thirty
twenty a hundred thirty
twenty five one hundred thirty five
32 a hundred and twenty
35 125
forty 115
fifty a hundred thirty five
sixty four 83
eighty 83
100 seventy three
Max. radial force* N one,two 3~100 2100
Max. axial pressure* 1,two three~100 1050
Full Load Efficiency % one three~ten ≥97%
two fifteen~a hundred ≥94%
Backlash arc.min one 3~ten ≤5
two fifteen~a hundred ≤8

*Greatest radial power and highest axial drive, when the output is 100rpm, it functions on the centre placement (L/two) of the output shaft.

Dimensions (mm):

Product kind No. of stage L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 D1 D2
90AE one 151 33.7 77.three 40 36 28 4 3 forty 10 Φ90 Φ70G7
two a hundred sixty five.five 91.eight
No. of stage D3 D4 D5 D6 D7 D8 B1 H1 G1 G2 G3 Q3
1,2 ≤19G7 Φ20h7 Φ30 Φ60h7 Φ90 Φ70 6 22.five M5×12 M6×12 M6×18 eighty

Particulars of AE collection Planetary CZPT

System

Compact output shaft system

It adopts the design of output shaft built-in system, compact structure, high rigidity, and it can stand up to big influence. Location the input coupling and the solar equipment at the middle of the output shaft to enhance the concentricity of the elements, thus properly managing the equipment clearance and enhancing the backlash of the entire gearbox.
 

Construction

Complete needle construction

The interior bearing of the planetary equipment adopts a full-needle design, the internal gap is manufactured by a grinding procedure, the surface area hardness is HRC60, and the cylindricity is much less than .003mm.
 

Compared with AF Collection
AF sequence planetary gearbox employs square by means of hole flange, but AE collection employs round threaded flange.
For other specifications, AE series planetary gearbox is comparable with AF series.

Other Model Varieties of AE series Planetary CZPT
 

Far more goods,remember to click right here…
 

Assembly Procedure

Remember to stick to the ideas bellow to assemble the servo motor and reducer. Besides for specified products, there are a variety of proportions of servo motors, some motors may possibly not be ready to hook up with flanges.For that reason, be sure to use the correct motor which is specified when spot your purchase.

 

In Circumstance Of Assembling A Motor With no Essential

one.Consider off the rubber cap, change the input shaft, and match the head of the bolt to the hole of the rubber cap. Make confident that the correcting bolt is loosened.

2.Gradually put the motor shaft into the enter shaft (Ensure that it is effortlessly set in CZPT jam.). Be careful not to be inserted with the motor tilted.

3.Connect the motor to the reducer and fasten the bolt with designated fastening torque. See Desk one.

4.CZPTen the fixing bolt of the input shaft with designated fastening torque wrench, etc. See Table two.

five.Set on the rubber cap.
 

 

Desk one

Motor Combination Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 one. ten
M4 three. 30
M5 5.eight sixty
M6 9.8 100
M8 19.6 two hundred
M10 39.2 400
M12 68.6 seven-hundred
M16 168 1650

Desk 2

Mix Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 one.5 15
M4 3.five 35
M5 7.one seventy one
M6 twelve one hundred twenty
M8 thirty 300
M10 sixty 612

 

Business Profile

Supply

Our Solutions

one.Upkeep time & Guarantee: one year following leaving factory 
2.Other provider: Which includes modeling selection information, set up manual, and issue capturing information, etc.

FAQ

Q: What’re your main products?
A: We presently generate Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, Substantial CZPT Planetary CZPT and CZPT Cycloidal CZPT and many others.. You can check out the requirements for earlier mentioned motors on our internet site and you can email us to recommend essential motors for each your specification way too.

Q: How to select a suited motor or gearbox?
A:If you have motor photographs or drawings to present us, or you have detailed specifications, this kind of as, voltage, pace, torque, motor dimensions, doing work mode of the motor, required life span and sound degree and so forth, remember to do not hesitate to let us know, then we can advise appropriate motor for each your ask for appropriately.

Q: Do you have a CZPT service for your normal motors or gearboxes?
A: Sure, we can personalize per your ask for for the voltage, speed, torque and shaft measurement/shape. If you require extra wires/cables soldered on the terminal or need to have to insert connectors, or capacitors or EMC we can make it way too.

Q: Do you have an personal design support for motors?
A: Indeed, we would like to layout motors individually for our buyers, but some variety of  molds are necessory to be developped which could require precise expense and layout charging. 

Q: What’s your lead time?
A: CZPTly talking, our normal regular item will want fifteen-30days, a little bit more time for CZPT items. But we are very adaptable on the lead time, it will count on the distinct orders.
 

 

Zd 5~8 Backlash High CZPT and Helix Gear Round 90mm Ae Series Planetary CZPT