Zd Agricultural Machinery High Precision 98mm Zdr Series Planetary Gearbox

Zd Agricultural CZPTry High CZPT 98mm Zdr Series Planetary CZPT

ZD Agricultural CZPT Large CZPT 98mm ZDR Series Planetary CZPT

Solution Description

ZDR series planetary gearbox has adopted helical equipment layout, so the meshing of gears can be smoother. This series has a double-supported and sealed structure, easier to install for buyers. It is commonly utilized in linear manipulators, packaging equipment, assembly traces and etc. The highest backlash of the ZDR series is significantly less than five arc.min and the reduction ratio handles 3~eighty one.

The Product Advantages of Planetary CZPT:

one.Versatile composition design and style, in line with a variety of operating conditions.
2.Ring equipment processing technologies: Utilizing interior gear slotting device and hobbing machine the precision of ring equipment following processing can get to GB7.
three.Hardened equipment secondary scraping technologies: secondary higher-pace dry reducing of gear eradicates gear deformation triggered by heat treatment. Gear precision can attain GB6.
four.CZPT backlash testing.

How to Go through:
98  ZDR  20   ( )     (S) –   750  T1   ( )
  a     b      c     d       e        f       g     h
 

a    Frame Dimension     98 =98mm
b    Series code:ZDR     Oblique tooth precision
c    Reduction Ratio     Single Phase: 3,four,five,6,seven,eight,nine,ten
    Two Levels: 15,20,twenty five,35,forty five,eighty one.
d    Backlash     One Stage: 8arc.min
    Two Levels: 12arc.min
e    Input shaft variety     S:All round locking(Omission)(regardless whether the motor with keyway can use it. But D Cut cannot use)
    S1:Locking with locking ring(irrespective whether the motor with keyway can use it. But D Cut can not use)
    S2:Locking with keyway (enter shaft with important)
    K:With keyway
    A:0ther kind (remember to get in touch with with us)
f Applicable servo motor energy (W),Please contact us for specific electricity
g Please contact us for the mouting kind of the flang
h You should speak to us for the model of servo motor

 

Spesifications & Details

When enter speed is 3000rpm

Product NO. Reduction Ratio Motor Output Shaft Speed (rpm) CZPT Output Torque (N.m) Instantaneous max.Output Torque (N.m) Permissible Radial Load (N) Permissible Axial Load (N) Inside Instant Ohnertia Of Enter Shaftconversion (x10-four kg.m2) Perrmissible Output Torque (N.m) Instantaneous Max. Permissible Output Torque (N.m)
98ZDR three one thousand one thousand seven.55 22.8 882 441 two.43 eighteen.three fifty four.nine
1500 12.3 37.one
2000 seventeen.two 51.five
five one thousand 600 13.four 40.five 1080 539 one.85 23.five 70.six
1500 21.five sixty four.4
9 750 333 18.2 54.seven 1470 735 .650 eighteen.2 fifty four.7

Note1) The second of enter shaft conversion is only acquired from the reducer, so it does not contain second of inertia of the motor.
Note2) The max. enter pace is 5000rpm. Normally set to 3000rpm or significantly less.
Note3) The permissble radial load is indicated on the heart of the output shaft.
Note4) All values are inside of the assortment corresponding to helical equipment.

When enter pace is 3000rpm

Item NO. Reduction Ratio Motor Output Shaft Speed (rpm) CZPT Output Torque (N.m) Instantaneous max.Output Torque (N.m) Permissible Radial Load (N) Permissible Axial Load (N) Inner Minute Ohnertia Of Input Shaftconversion (x10-4 kg.m2) Perrmissible Output Torque (N.m) Instantaneous Max. Permissible Output Torque (N.m)
98ZDR 15 750 200 30.4 91.two 1760 882 .seven-hundred 30.four ninety one.two
twenty 750 150 40.six 122 1910 955 .690 40.6 122
twenty five 750 120 50.7 152 2060 1030 .680 50.7 152
35 four hundred 85 37. 111 2060 1030 .269 37. 111
forty five two hundred 66 21.1 sixty three.5 2060 1030 .5716 28.3 85.2
81 one hundred 37 fourteen. forty two. 2060 1030 .030 17.8 fifty three.5

Note1) The instant of input shaft conversion is only acquired from the reducer, so it does not contain second of inertia of the motor.
Note2) The max, input velocity is 5000rpm. Usually set to 3000rpm or less.
Note3) The permissble radial load is indicated on the center of the output shaft.
Note4) All values are inside of the variety corresponding to helical gear.

When enter velocity is 2000rpm
 

Solution NO. Reduction Ratio Motor Output Shaft Velocity (rpm) CZPT Output Torque (N.m) Instantaneous max.Output Torque (N.m) Permissible Radial Load (N) Permissible Axial Load (N) Internal Minute Ohnertia Of Enter Shaftconversion (x10-four kg.m2) Perrmissible Output Torque (N.m) Instantaneous Max. Permissible Output Torque (N.m)
98ZDR three 750 666 eight.seventy three 26.two 1571 505 2.forty three eighteen.three 54.9
1000 12.three 37.one
1500 eighteen.3 54.9
five 750 four hundred 15.5 forty six.five 1230 615 one.eighty five 23.five 70.6
one thousand 21.five 64.four
nine 400 222 fourteen. forty one.nine 1680 840 .650 eighteen.2 fifty four.seven
15 400 133 23.3 69.eight 2571 1571 .seven hundred 30.four 91.2
20 400 a hundred 31. ninety three.one 2180 1090 .294 forty.6 122
25 400 80. 38.8 116 2060 1030 .680 fifty.7 152
35 two hundred fifty seven. 22. 66. 2340 1170 .269 37. 111
45 a hundred forty four.four 14. 42.1 2060 1030 .5715 28.three eighty five.2
200 28.three 85.2
81 one hundred 24.6 17.eight 53.five 2060 1030 .0300 seventeen.eight fifty three.five

Note1) The instant of input shaft conversion is only obtained from the reducer, so it does not incorporate instant of inertia of the motor.
Note2) The permissble radial load is indicated on the heart of the output shaft.
Note3) All values are in the selection corresponding to helical equipment.

Dimensions (Unit: mm):

 

Merchandise NO. Reduction Ratio Motor Overall Duration L Output Shaft Flange
CZPT- made
MSMA
Yaskawa-manufactured SGMASH SGMSH Mitsubishi-manufactured HC-KFS
HC-RFS
LR S Q QM QM W×U T D LB LE LA LZ X
98ZDR 81 100 158 61 24 40 35 M6(depth)20 8×27 7 100 90 five a hundred and fifteen M8 20
45 two hundred 165
35 four hundred
nine 750 158.5
15,twenty,25 750 171
three,5 1000 177
three,5 1500
3 2000

Note1) Make sure you inquire to us if motor model is not normal (Matching motor checklist). (The flange dimension may be various if motor assension is various.)
Note2) Rotation of the output shaft is in the exact same route as that of motor enter.
Note3) All values are inside of the range corresponding to helical gear.
 

System

CZPT assist system

1.The planetary equipment is positioned in the center of the output shaft.
two.The output shaft bearing is positioned at each ends of the planetary equipment.
3.Separate solar gear and coupling.

Compact output shaft system

It adopts the design of output shaft built-in technique, compact composition, high rigidity, and it can face up to big impact. Location the input coupling and the sunlight equipment at the heart of the output shaft to enhance the concentricity of the components, thereby properly controlling the gear clearance and strengthening the backlash of the whole gearbox.

 

Composition

Full needle composition

The interior bearing of the planetary gear adopts a total-needle design, the inner gap is made by a grinding procedure, the surface area hardness is HRC60, and the cylindricity is considerably less than .003mm.

Ring equipment composition

The integral composition of the ring equipment and the output flange improves its rigidity and decreases misassembly.

 

Other Model Variety of ZDR Sequence

A lot more items,make sure you simply click here…

Organization Profile

 

Supply

Our Solutions

1.Routine maintenance time & Guarantee: 1 year after leaving manufacturing unit.

2.Other support: Which includes modeling choice manual, installation information, and dilemma capturing manual, etc.

FAQ

Q: What’re your major merchandise?
A: We at present produce Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, Large CZPT Planetary CZPT and CZPT Cycloidal CZPT and so on.. You can check the requirements for over motors on our web site and you can email us to recommend necessary motors for each your specification as well.

Q: How to pick a appropriate motor or gearbox?
A:If you have motor pictures or drawings to present us, or you have in depth technical specs, this kind of as, voltage, speed, torque, motor dimension, doing work manner of the motor, essential lifetime and noise level etc, please do not be reluctant to let us know, then we can advocate suited motor per your ask for appropriately.

Q: Do you have a CZPT service for your normal motors or gearboxes?
A: Of course, we can customize for every your ask for for the voltage, velocity, torque and shaft measurement/form. If you need to have additional wires/cables soldered on the terminal or require to insert connectors, or capacitors or EMC we can make it too.

Q: Do you have an person design service for motors?
A: Sure, we would like to style motors individually for our buyers, but some variety of  molds are necessory to be developped which could want precise cost and style charging. 

Q: What is actually your direct time?
A: CZPTly talking, our regular regular product will need 15-30days, a bit longer for CZPT merchandise. But we are very adaptable on the lead time, it will count on the specific orders.

Zd Agricultural CZPTry High CZPT 98mm Zdr Series Planetary CZPT