Zd High Precision and Helix Gear Round 120mm Ae Series Planetary Gearbox

Zd High CZPT and Helix Gear Round 120mm Ae Series Planetary CZPT

ZD Substantial CZPT and CZPTx Gear Spherical 120mm AE Collection Planetary CZPT

Item Description

AE Sequence Planetary CZPT furthermore provides entrance and rear oil seals, employs the output shaft double assist framework and design of helix equipment, which can make the equipment meshing  smoother and stable, the AE Sequence can be utilized in a variety of handle transmission fields with servo motors. The backlash of the AE series is much less than five arc.min and the reduction ratio addresses 3~one hundred.

The Product Advantages of Planetary CZPT:

one.Adaptable construction layout, in line with different working problems.
2.Ring gear processing engineering: Employing internal gear slotting equipment and hobbling equipment the precision of ring equipment after processing can achieve GB7.
3.Hardened gear secondary scraping engineering: secondary higher-velocity dry chopping of gear eradicates equipment deformation caused by heat treatment. Equipment precision can reach GB6.
four.CZPT backlash screening.

How To Study
120    AE    10    (  )     (S) – 40   T1
 a       b      c      d        e       f       g

a    Frame Size     120=120mm
b    Series code: AE     Round mounting flange collection
c    Reduction Ratio     Solitary Phase: 3,4,five,six,seven,eight,nine,10
    Two Phases: fifteen,20,25,30,35,forty,forty five,fifty,60,70,eighty,90,100
d    Backlash     One Phase: ≤5arc.min  
    Two Stages: ≤8arc.min 
e    Input shaft kind     S: Total locking (Omitted) (Regardless of whether or not the motor has a keyway)
    S1: Locking with locking ring (Irrespective whether or not the motor has a  keyway )
    S2: Locking with keyway (Enter shaft with key)
    K: With keyway
    A: Other sorts (Please make contact with with us)
f Relevant servo motor power (W),You should contact us for particular power
g You should speak to us for the mounting type of the flange

 

Spesifications & Information

 

Item Type Unit Number Of Stage Reduction Ratio 120AE
Rated Output Torque N.M one three one hundred forty four
four two hundred
5 220
7 two hundred
8 one hundred eighty
10 a hundred and fifty five
2 twelve 209
fifteen 209
sixteen 275
twenty 275
25 280
32 260
35 265
40 245
fifty 280
64 one hundred eighty
eighty a hundred and eighty
one hundred a hundred sixty five
Max. radial force* N 1,two three~a hundred 2520
Max. axial drive* 1,two 3~one hundred 1260
Complete Load Effectiveness % one three~ten ≥97%
two fifteen~one hundred ≥94%
Backlash arc.min one three~ten ≤5
2 fifteen~a hundred ≤8

*Optimum radial force and highest axial power, when the output is 100rpm, it acts on the centre placement (L/two) of the output shaft.

Dimensions (mm):

Product sort No. of phase L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 D1 D2
120AE one 196 forty eight ninety three fifty five fifty forty 5 4 58 10 Φ145 Φ110G7
two 207 104
No. of phase D3 D4 D5 D6 D7 D8 B1 H1 G1 G2 G3 Q3
one,2 ≤24G7 Φ25h7 Φ40 Φ80h7 Φ115 Φ100 eight 28 M8×21 M10×16 M10×22 a hundred thirty

Information of AE collection Planetary CZPT

System

Compact output shaft system

It adopts the style of output shaft integrated technique, compact composition, higher rigidity, and it can endure big impact. Area the enter coupling and the sunshine equipment at the center of the output shaft to improve the concentricity of the elements, thereby successfully controlling the gear clearance and bettering the backlash of the entire gearbox.
 

Structure

Entire needle composition

The inner bearing of the planetary equipment adopts a entire-needle layout, the inner gap is manufactured by a grinding procedure, the floor hardness is HRC60, and the cylindricity is much less than .003mm.
 

In contrast with AF Sequence
AF series planetary gearbox utilizes square through gap flange, but AE sequence makes use of round threaded flange.
For other requirements, AE series planetary gearbox is similar with AF sequence.

Other Product Kinds of AE sequence Planetary CZPT
 

Far more goods,you should click listed here…
 

Assembly Treatment

Make sure you follow the suggestions bellow to assemble the servo motor and reducer. Except for specified merchandise, there are numerous proportions of servo motors, some motors may possibly not be in a position to link with flanges.Therefore, be sure to use the proper motor which is specified when place your get.

 

In Situation Of Assembling A Motor Without having Key

1.Take off the rubber cap, switch the enter shaft, and match the head of the bolt to the hole of the rubber cap. Make sure that the correcting bolt is loosened.

2.Steadily put the motor shaft into the input shaft (Guarantee that it is efficiently set in CZPT jam.). Be cautious not to be inserted with the motor tilted.

three.Connect the motor to the reducer and fasten the bolt with designated fastening torque. See Desk one.

4.CZPTen the fixing bolt of the input shaft with specified fastening torque wrench, and many others. See Table 2.

five.Place on the rubber cap.
 

 

Table one

Motor Mix Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 one. 10
M4 three. thirty
M5 five.8 60
M6 9.eight one hundred
M8 19.6 200
M10 39.2 400
M12 sixty eight.6 seven-hundred
M16 168 1650

Table two

Blend Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 1.5 15
M4 three.5 35
M5 seven.one 71
M6 twelve one hundred twenty
M8 30 300
M10 60 612

 

Firm Profile

Supply

Our Companies

one.Upkeep time & Guarantee: 1 year soon after leaving manufacturing facility 
2.Other provider: Like modeling variety manual, set up manual, and dilemma taking pictures information, etc.

FAQ

Q: What’re your main goods?
A: We at present create Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, Large CZPT Planetary CZPT and CZPT Cycloidal CZPT and many others.. You can check out the specs for previously mentioned motors on our web site and you can electronic mail us to advocate needed motors for every your specification as well.

Q: How to choose a suitable motor or gearbox?
A:If you have motor pictures or drawings to present us, or you have comprehensive requirements, this sort of as, voltage, velocity, torque, motor dimensions, working mode of the motor, required lifetime and sound stage and so forth, please do not be reluctant to allow us know, then we can recommend suitable motor for every your request accordingly.

Q: Do you have a CZPT support for your normal motors or gearboxes?
A: Yes, we can customize for each your request for the voltage, velocity, torque and shaft size/shape. If you want added wires/cables soldered on the terminal or want to incorporate connectors, or capacitors or EMC we can make it too.

Q: Do you have an specific style services for motors?
A: Indeed, we would like to design motors independently for our customers, but some kind of  molds are necessory to be developped which may possibly need to have actual expense and design charging. 

Q: What’s your direct time?
A: CZPTly talking, our regular normal solution will need to have fifteen-30days, a little bit lengthier for CZPT items. But we are quite versatile on the direct time, it will depend on the particular orders.
 

 

Zd High CZPT and Helix Gear Round 120mm Ae Series Planetary CZPT