ZD Higher CZPT and CZPTx Equipment Spherical 90mm AE Collection Planetary CZPT
Product Description
AE Collection Planetary CZPT additionally provides front and rear oil seals, uses the output shaft double assistance framework and style of helix equipment, which tends to make the gear meshing smoother and secure, the AE Series can be used in a variety of manage transmission fields with servo motors. The backlash of the AE sequence is considerably less than five arc.min and the reduction ratio covers 3~one hundred.
The Product Advantages of Planetary CZPT:
1.Adaptable composition style, in line with numerous working problems.
two.Ring equipment processing technological innovation: Using inner gear slotting machine and hobbling device the precision of ring gear soon after processing can reach GB7.
three.Hardened equipment secondary scraping technology: secondary large-velocity dry cutting of gear eliminates equipment deformation caused by warmth remedy. Equipment accuracy can reach GB6.
4.CZPT backlash screening.
How To Read
90 AE 10 ( ) (S) – 40 T1
a b c d e f g
a | Frame Dimension | ninety=90mm |
b | Series code: AE | Round mounting flange sequence |
c | Reduction Ratio | Single Stage: 3,four,5,6,7,eight,9,10 Two Stages: fifteen,twenty,25,thirty,35,40,forty five,50,60,70,80,ninety,a hundred |
d | Backlash | Single Stage: ≤5arc.min Two Levels: ≤8arc.min |
e | Input shaft sort | S: All round locking (Omitted) (No matter of whether the motor has a keyway) S1: Locking with locking ring (Regardless regardless of whether the motor has a keyway ) S2: Locking with keyway (Enter shaft with crucial) K: With keyway A: Other types (You should get in touch with with us) |
f | Applicable servo motor electrical power (W),Please contact us for specific energy | |
g | Remember to contact us for the mounting kind of the flange |
Spesifications & Particulars
Item Sort | Unit | Number Of Phase | Reduction Ratio | 90AE |
Rated Output Torque | N.M | 1 | 3 | 85 |
4 | 95 | |||
5 | 105 | |||
7 | 93 | |||
8 | eighty three | |||
10 | 70 | |||
2 | 12 | a hundred and fifteen | ||
fifteen | a hundred and fifteen | |||
sixteen | a hundred thirty | |||
twenty | 130 | |||
twenty five | a hundred thirty five | |||
32 | one hundred twenty | |||
35 | one hundred twenty five | |||
forty | 115 | |||
fifty | a hundred thirty five | |||
64 | eighty three | |||
eighty | 83 | |||
100 | 73 | |||
Max. radial force* | N | 1,two | 3~a hundred | 2100 |
Max. axial drive* | 1,two | three~a hundred | 1050 | |
Total Load Effectiveness | % | one | three~ten | ≥97% |
two | 15~100 | ≥94% | ||
Backlash | arc.min | 1 | 3~10 | ≤5 |
two | fifteen~one hundred | ≤8 |
*Maximum radial pressure and optimum axial force, when the output is 100rpm, it functions on the middle situation (L/two) of the output shaft.
Dimensions (mm):
Product sort | No. of stage | L1 | L2 | L3 | L4 | L5 | L6 | L7 | L8 | L9 | L10 | D1 | D2 |
90AE | one | 151 | 33.seven | seventy seven.three | 40 | 36 | 28 | four | three | 40 | 10 | Φ90 | Φ70G7 |
2 | a hundred sixty five.5 | 91.eight | |||||||||||
No. of phase | D3 | D4 | D5 | D6 | D7 | D8 | B1 | H1 | G1 | G2 | G3 | Q3 | |
1,two | ≤19G7 | Φ20h7 | Φ30 | Φ60h7 | Φ90 | Φ70 | six | 22.five | M5×12 | M6×12 | M6×18 | 80 |
Details of AE collection Planetary CZPT
Mechanism
Compact output shaft system
It adopts the layout of output shaft built-in program, compact framework, substantial rigidity, and it can stand up to large influence. Location the input coupling and the sunshine gear at the center of the output shaft to boost the concentricity of the parts, therefore successfully controlling the gear clearance and strengthening the backlash of the total gearbox.
Framework
Complete needle structure
The interior bearing of the planetary equipment adopts a entire-needle style, the internal gap is produced by a grinding process, the surface area hardness is HRC60, and the cylindricity is considerably less than .003mm.
In contrast with AF Sequence
AF sequence planetary gearbox employs square by way of gap flange, but AE sequence employs spherical threaded flange.
For other specifications, AE series planetary gearbox is related with AF collection.
Other Model Kinds of AE collection Planetary CZPT
Much more products,remember to click on listed here…
Assembly Method
Remember to adhere to the guidelines bellow to assemble the servo motor and reducer. Other than for specified items, there are different proportions of servo motors, some motors may not be ready to join with flanges.Therefore, be certain to use the proper motor which is specified when location your order.
In Scenario Of Assembling A Motor With no Key
1.Consider off the rubber cap, turn the input shaft, and match the head of the bolt to the gap of the rubber cap. Make confident that the correcting bolt is loosened.
two.Progressively set the motor shaft into the enter shaft (Make certain that it is smoothly put in CZPT jam.). Be watchful not to be inserted with the motor tilted.
3.Attach the motor to the reducer and fasten the bolt with selected fastening torque. See Desk one.
4.CZPTen the fixing bolt of the input shaft with specified fastening torque wrench, and so on. See Desk 2.
5.Set on the rubber cap.
Desk one
Motor Mix Bolt | CZPTening Torque | |
(N·m) | (kgf·cm) | |
M3 | one. | 10 |
M4 | three. | 30 |
M5 | five.8 | 60 |
M6 | 9.8 | one hundred |
M8 | 19.six | 200 |
M10 | 39.two | four hundred |
M12 | sixty eight.6 | seven hundred |
M16 | 168 | 1650 |
Table 2
Combination Bolt | CZPTening Torque | |
(N·m) | (kgf·cm) | |
M3 | 1.5 | fifteen |
M4 | 3.5 | 35 |
M5 | 7.one | seventy one |
M6 | twelve | a hundred and twenty |
M8 | 30 | 300 |
M10 | sixty | 612 |
Organization Profile
Supply
Our Solutions
1.Maintenance time & Warranty: 1 yr soon after leaving manufacturing facility
two.Other services: Which includes modeling selection guidebook, set up guide, and difficulty capturing guide, etc.
FAQ
Q: What’re your main items?
A: We at present create Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, High CZPT Planetary CZPT and CZPT Cycloidal CZPT and many others.. You can verify the specs for above motors on our site and you can electronic mail us to recommend necessary motors for every your specification as well.
Q: How to pick a suitable motor or gearbox?
A:If you have motor images or drawings to show us, or you have thorough specs, this kind of as, voltage, pace, torque, motor dimension, working mode of the motor, essential life time and sounds level and so on, you should do not be reluctant to let us know, then we can advocate suited motor for each your request appropriately.
Q: Do you have a CZPT service for your standard motors or gearboxes?
A: Of course, we can customise for each your request for the voltage, speed, torque and shaft dimension/form. If you require extra wires/cables soldered on the terminal or need to have to include connectors, or capacitors or EMC we can make it as well.
Q: Do you have an individual layout support for motors?
A: Indeed, we would like to style motors independently for our consumers, but some type of molds are necessory to be developped which may possibly need to have specific value and style charging.
Q: What’s your guide time?
A: CZPTly speaking, our regular normal merchandise will require 15-30days, a little bit lengthier for CZPT items. But we are extremely versatile on the guide time, it will depend on the particular orders.