Zd IP65 Protection Grade High Precision and Helix Gear Round 120mm Ae Series Planetary Gearbox

Zd IP65 Protection Grade High CZPT and Helix Gear Round 120mm Ae Series Planetary CZPT

ZD IP65 Security Quality Higher CZPT and CZPTx Gear Spherical 120mm AE Series Planetary CZPT

Item Description

AE Sequence Planetary CZPT in addition adds entrance and rear oil seals, employs the output shaft double assist composition and design and style of helix equipment, which helps make the equipment meshing  smoother and secure, the AE Sequence can be used in different control transmission fields with servo motors. The backlash of the AE series is less than five arc.min and the reduction ratio covers 3~a hundred.

The Product Advantages of Planetary CZPT:

1.Flexible structure layout, in line with various operating conditions.
2.Ring equipment processing technology: Making use of inside gear slotting equipment and hobbling device the precision of ring gear soon after processing can achieve GB7.
three.Hardened gear secondary scraping technological innovation: secondary large-velocity dry chopping of equipment removes equipment deformation brought on by warmth treatment method. Equipment accuracy can attain GB6.
four.CZPT backlash tests.

How To Go through
120    AE    10    (  )     (S) – 40   T1
 a       b      c      d        e       f       g

a    Frame Dimension     120=120mm
b    Series code: AE     Spherical mounting flange sequence
c    Reduction Ratio     One Stage: 3,four,5,6,7,eight,9,ten
    Two Phases: fifteen,twenty,25,thirty,35,forty,forty five,fifty,sixty,70,eighty,90,one hundred
d    Backlash     Single Phase: ≤5arc.min  
    Two Phases: ≤8arc.min 
e    Input shaft variety     S: Total locking (Omitted) (No matter of no matter whether the motor has a keyway)
    S1: Locking with locking ring (No matter whether the motor has a  keyway )
    S2: Locking with keyway (Enter shaft with essential)
    K: With keyway
    A: Other sorts (You should contact with us)
f Applicable servo motor electricity (W),You should get in touch with us for distinct electrical power
g Make sure you contact us for the mounting sort of the flange

 

Spesifications & Particulars

 

Product Sort Device Number Of Phase Reduction Ratio 120AE
Rated Output Torque N.M 1 three 144
four two hundred
five 220
7 200
eight one hundred eighty
ten 155
two 12 209
fifteen 209
sixteen 275
twenty 275
25 280
32 260
35 265
forty 245
fifty 280
sixty four one hundred eighty
eighty a hundred and eighty
one hundred one hundred sixty five
Max. radial drive* N 1,2 3~a hundred 2520
Max. axial drive* one,2 3~100 1260
Entire Load Effectiveness % 1 three~ten ≥97%
2 fifteen~a hundred ≥94%
Backlash arc.min 1 3~ten ≤5
two fifteen~a hundred ≤8

*Optimum radial pressure and highest axial force, when the output is 100rpm, it functions on the center placement (L/two) of the output shaft.

Dimensions (mm):

Product type No. of phase L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 D1 D2
120AE one 196 forty eight 93 fifty five 50 40 five 4 58 10 Φ145 Φ110G7
2 207 104
No. of phase D3 D4 D5 D6 D7 D8 B1 H1 G1 G2 G3 Q3
1,two ≤24G7 Φ25h7 Φ40 Φ80h7 Φ115 Φ100 eight 28 M8×21 M10×16 M10×22 130

Specifics of AE series Planetary CZPT

Mechanism

Compact output shaft mechanism

It adopts the layout of output shaft integrated method, compact structure, high rigidity, and it can stand up to big influence. Location the enter coupling and the sun equipment at the heart of the output shaft to enhance the concentricity of the parts, thus successfully controlling the gear clearance and strengthening the backlash of the total gearbox.
 

Structure

Complete needle construction

The interior bearing of the planetary equipment adopts a complete-needle design and style, the internal hole is manufactured by a grinding procedure, the floor hardness is HRC60, and the cylindricity is much less than .003mm.
 

Compared with AF Series
AF collection planetary gearbox employs square by way of gap flange, but AE sequence makes use of round threaded flange.
For other requirements, AE series planetary gearbox is comparable with AF sequence.

Other Model Sorts of AE series Planetary CZPT
 

More goods,you should click right here…
 

Assembly Procedure

Please follow the tips bellow to assemble the servo motor and reducer. Besides for specified products, there are a variety of dimensions of servo motors, some motors may not be able to link with flanges.Consequently, be sure to use the proper motor which is specified when spot your purchase.

 

In Situation Of Assembling A Motor Without having Important

one.Just take off the rubber cap, change the enter shaft, and match the head of the bolt to the gap of the rubber cap. Make confident that the repairing bolt is loosened.

two.Slowly put the motor shaft into the enter shaft (Make sure that it is effortlessly set in CZPT jam.). Be mindful not to be inserted with the motor tilted.

three.Attach the motor to the reducer and fasten the bolt with designated fastening torque. See Desk 1.

four.CZPTen the repairing bolt of the enter shaft with designated fastening torque wrench, and so forth. See Table two.

five.Set on the rubber cap.
 

 

Table one

Motor Mix Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 one. ten
M4 three. 30
M5 five.eight 60
M6 nine.eight a hundred
M8 19.6 200
M10 39.two four hundred
M12 68.six seven-hundred
M16 168 1650

Table two

Blend Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 one.5 15
M4 three.5 35
M5 7.one seventy one
M6 twelve 120
M8 30 300
M10 60 612

 

Business Profile

Shipping and delivery

Our Services

one.Servicing time & Guarantee: one year soon after leaving manufacturing unit 
two.Other support: Like modeling variety guide, installation manual, and dilemma capturing manual, etc.

FAQ

Q: What’re your main products?
A: We currently produce Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, Higher CZPT Planetary CZPT and CZPT Cycloidal CZPT etc.. You can check the specifications for previously mentioned motors on our site and you can email us to recommend necessary motors per your specification way too.

Q: How to select a appropriate motor or gearbox?
A:If you have motor pictures or drawings to present us, or you have in depth technical specs, this kind of as, voltage, speed, torque, motor dimensions, operating mode of the motor, needed life time and sounds degree and so on, you should do not be reluctant to let us know, then we can advocate suited motor for every your ask for appropriately.

Q: Do you have a CZPT support for your standard motors or gearboxes?
A: Yes, we can customize per your ask for for the voltage, speed, torque and shaft dimensions/form. If you need to have added wires/cables soldered on the terminal or need to have to include connectors, or capacitors or EMC we can make it too.

Q: Do you have an specific design and style services for motors?
A: Indeed, we would like to design and style motors separately for our consumers, but some sort of  molds are necessory to be developped which might need specific price and design and style charging. 

Q: What is your direct time?
A: CZPTly speaking, our regular normal item will want 15-30days, a bit for a longer time for CZPT items. But we are very flexible on the lead time, it will rely on the particular orders.
 

 

Zd IP65 Protection Grade High CZPT and Helix Gear Round 120mm Ae Series Planetary CZPT